Luxury Paint Refinishing

Factory-matched colour, flawless depth and gloss—finished to marque standards.

Why AMA Prestige?

Prestige vehicles deserve more than a respray—they warrant colour science and process control that remove guesswork. We combine manufacturer-approved colour systems with spectrophotometer analysis, precision masking and sealed, bake-cured booths. Metallics, pearls, tri-coats and matte/satin finishes are executed exactly as intended by the marque. We blend where necessary for invisible transitions, then refine with multi-stage paint correction for uniform depth and gloss. The outcome is a surface that reads perfectly in daylight and showroom lighting, with durability and clarity that lasts.

What we deliver

Exact Colour Matching

Manufacturer-approved tints, spectrophotometer analysis and test cards deliver seamless continuity across panels.

Multi-Stage Application

Calibrated coats, flash times and bake cycles produce consistent hardness, depth and gloss.

Surface Preparation

Panel preparation, edge control and precision masking protect adjacent trims and finishes.

Panel Blending

We blend adjacent panels when required so metallic flake and tone transition flawlessly.

Mirror-Perfect Finishing

Wet-flatting, correction and polishing remove orange peel, haze and micro-marring.

Matte & Satin Finishes

Controlled sheen levels and contaminant management maintain uniformity across sensitive finishes.

Dust-Free Controlled Booths

Sealed, filtered environments with colour-correct lighting minimise defects before correction.

EV-Aware Heat Management

Refinish parameters adjusted around battery zones and sensitive components where applicable.

What you can expect

Our Process

Assessment & Colour Read

Inspect damage, scan colour with spectrophotometer, confirm refinish scope.

Method Plan

Define prep, blend strategy, materials and bake cycles per paint system.

Preparation & Protection

Panel prep, precision masking, trim removal and contamination control.

Application

Primer, base and clear applied with calibrated film builds and flash times.

Bake & Cure

Controlled booth bake delivers uniform hardness and long-term durability.

Correction & Polish

Multi-stage refinement for even texture, clarity and mirror-level gloss.

Quality Control & Handover

Colour-correct inspection, panel gap check and aftercare guidance.

Technology & Facilities

Refinish quality relies on colour science, environment and repeatable controls. Our facilities are engineered to keep variables stable—so tone, flake, depth and gloss are consistent across every panel.

Spectrophotometer colour analysis and digital mixing bank
Sealed, filtered spray booths with calibrated bake cycles
Colour-correct inspection lighting and gloss measurement tools
OEM-approved paint systems for metallic, pearl, tri-coat and matte

Precision Repair for Distinguished Marques

Expert refinishing solutions for every finish type and damage scenario

Vehicle Classifications

Prestige Sedans

Executive & Luxury

Luxury SUVs

Premium Utility

Grand Tourers

Performance Luxury

Electric Vehicles

EV Specialist

Damage Restoration

Localised Chip Repair

Targeted base/clear application; blend edges for invisible touch-ins.

Panel Respray & Blend

Refinish panel; feather and blend adjacent surfaces for continuity.

Scratch Removal & Correction

Wet-sand, correct and polish; restore clarity without repainting where possible.

Pearl/Tri-Coat Refinishing

Layered application replicates depth, flop and luminous colour shifts precisely.

Matte/Satin Finish Restoration

Sheen-matched coatings; contamination control preserves uniform, non-gloss appearance.

Metallic Flake Orientation Match

Spray technique aligns flake; transitions look factory in all lighting.

Bumper Scuffs & Texture Matching

Recreate OE texture; colour and clear align with surrounding plastics.

Stone-Guard & Clearcoat Rejuvenation

Correct haze; reflow and polish for renewed clarity and protection.

Frequently Asked Questions

Every refinish is unique to the paint system, colour, finish and panel geometry. These FAQs cover colour matching, blending, matte/satin care, timeframes and aftercare. For complex finishes or limited editions, book an inspection and we’ll specify the exact OEM-approved refinish method.

Will the new paint match my car exactly?

Yes. We read your colour with a spectrophotometer, mix via manufacturer systems and complete spray-outs to validate tone and flake. Where needed, we blend adjacent panels for a seamless transition in all lighting.

Can you repair without repainting the whole panel?

Often. For chips or light scratches we may use localised refinish and correction. If the colour or finish demands, we’ll recommend a panel respray and blend for invisibility.

How do you handle matte or satin finishes?

We use dedicated matte/satin systems, precise masking and contamination control. Sheen is matched to specification; polishing is avoided—aftercare guidance is provided at handover.

How long will refinishing take?

Typically one to three days depending on panel count, colour system, bake cycles and insurer approvals. We’ll confirm a schedule after assessment and update you through each stage.

Will the finish last like the original?

Yes—when applied and cured correctly. Our sealed booths, calibrated bakes and film-build controls deliver durability. Aftercare (washing and protection) helps preserve clarity long-term.

Is refinishing near EV components safe?

Yes. We manage temperatures, masking and electrical isolation around battery zones and sensitive modules, following marque guidance.